HDB Products
HDB Site
HDB Ordering Help
Shopping Cart

There are no items in your shopping cart.


Rallye Lite Kits:


With the Rallye Lite system we will be replacing all stock components from the upper triple clamp up. This is common with all the Rallye Lite kits.

All build ups begin with the Tower Mount, HDB Lower handlebar clamps your choice of heights and then HDB Top Clamps.

From there the kits differ with the choice of side plates.


Tower Mount.

Tower Mounts come in 4 widths for matching the upper triple lower handlebar clamp mounting holes. 90mm, 96mm, 100mm and 106mm.

Tower Mount thicknesses.

KTM 90mm, add .625", 96mm, 100mm and 106mm, add 1.000",

HDB Lower Clamps.

Then the HDB 1 1/8"Lower Clamps.

Shown are the available heights, when stacked on top of the Tower Mount the finished height of the centerline of the handlebars will be the lower clamp height added to the Tower mount thickness.


HDB Top Clamps,

With HDB Top Clamps we have 4 versions to choose from, SX, SXdx, ADV and ADVdx.

The SX Top Clamp is for those that want just a simple very strong clamp with no mounting holes to deal with, but is also for those that would like a blank canvas in which to customize for mounts of any kind.

This is the standard clamp that is shipped with the handguards if you don’t upgrade the top clamp. They are available for both 7/8” and 1 1/8” handlebars.

The SXdx Top Clamp is for those that would like a just few mounts for switches, but not a noisy top clamp. It does however have the room for LED indicators for the switch mounts and even a Powerlet socket mount. These are available for both 7/8” and 1 1/8” handlebars.

The ADV Top Clamp is the old Powerlet Top Clamp, redesigned so that the 2 Powerlet sockets won’t foul with a submounted Scott’s damper. This clamp also retains the mounts for 4 12volt 10amp pushbutton switches for lights or other accessories. These are available for only 1 1/8” handlebars.

The ADVdx Top Clamp is the ADV Top Clamp with the addition of LED indicators. These are available for only 1 1/8” handlebars.

All top clamps with LED indicators mounting holes come with supplied 5mm pre-wired for 12v LED's.